Onkyo dx2710 gear ..REPAIRED

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
R

roonie

Member
Joined 2010
My previous thread i have an issue with two gears slipping. Here i show my solution to the problem. I had to choose between a northern majestic heavily antlered bull caribou or her. Which would you have chosen...i am an outdoorsman.
Im hoping this repair will stiffen up the gear/wheel and make it what it should have been as far as flex goes.
 

Attachments

  • -1.jpg
    -1.jpg
    740.5 KB · Views: 54
  • -4.jpg
    -4.jpg
    430.5 KB · Views: 50
  • -5.jpg
    -5.jpg
    438.2 KB · Views: 49
R

roonie

Member
Joined 2010
well...its a lot better than it was but not perfect. I just think there is too much distance between the two holes that hold the shafts. i also took needlenose pliers and pinched the axle hole on the correct sides in an attempt to reduce the play on the axle.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom