one or two?

[vazzy]

Hi,

Soon i will come to pocess the following drivers.
HM130C0 X 2
HM210Z0 X 2
TW034XO X 2

When i ordered these i was wanting to build something similar to poly natalia, however with some (obvious?) differences. However after some consideration i'm unsure whether to build one set of 3 way speakers, as originally planned. Or building two sets of 2 way speakers (using the hm130c0's and some tweeters in one set and the hm210Z0's & tw034xo's in the other set).


The speakers are mostly going to be used for music and sometimes movies. The room they are going in at the moment is quiet small, however i doubt that they are going to stay there for a very long time.

I would be glad to hear some opinions.

Also if anyone has a set of hm210Z0's & tw034xo's could they please describe the sound and their set up. Im especially interested in the point where these two can be crossed ?

Thanks in advance.

 

[vazzy]

hmms no insights ?


The link for the poly natalia is http://www.blackdahlia.com/polyarti/polyarti.htm if that helps.

any suggestions/opinions would be appreciated!!

 

[sreten]

Without another two bass drivers you cannot build a 3 way
remotely based on the polly's so I'd say your hand is forced.

(Unless you were thinking of going active for the 3 way)

some info here :

http://www.worldaudiodesign.co.uk/loudspeakers.html


🙂/sreten.