Um, I can't discern if preorders are already closed... can I still add myself to the list (Option 2, black)?
Pre-orders will close once the device is finally available and listed in the store, until then everyone can feel free to note down their request her, PM me or send me a mail to info@headnhifi.com.
After this requests made here will be refered to the shop
Swalter,
Great work on the ODAC enclosure with options for 3.5 and RCA line out plus quite a nice little enclosure as well.
Your standalone version of the ODAC with 3.5 line out has turned out significantly cheaper than other ODAC distributors even though your option being the more customizable one, kudos to you for achieving that!
Also I think you are the only one offering the ODAC bare board with mini USB and 3.5 connector included, very nice.
Great work on the ODAC enclosure with options for 3.5 and RCA line out plus quite a nice little enclosure as well.
Your standalone version of the ODAC with 3.5 line out has turned out significantly cheaper than other ODAC distributors even though your option being the more customizable one, kudos to you for achieving that!
Also I think you are the only one offering the ODAC bare board with mini USB and 3.5 connector included, very nice.
Can I have all that's on the list under my name plus the "back panel and 2 RCA sockets as a small DIY kit for 6.50 CHF" option,please? TIA
Hi Nikola,
added the kit to your order as requested.
Stefan
Swalter,
Great work on the ODAC enclosure with options for 3.5 and RCA line out plus quite a nice little enclosure as well.
Your standalone version of the ODAC with 3.5 line out has turned out significantly cheaper than other ODAC distributors even though your option being the more customizable one, kudos to you for achieving that!
Also I think you are the only one offering the ODAC bare board with mini USB and 3.5 connector included, very nice.
the mini usb is standard on all odac and at least i am also offering the connector.
i think that the new casing looks great, can't wait for the actual production items.
-joe
Hi Swalter,
I would also like to change my option 3 to option 4.
Thanks
Hi Finbob, changed the option in the spreadsheet accordingly.
Stefan
I'm not exactly sure how does each option look like after the last changes.
Is the RCA version with sockets in the 'back' and some form of writing on the front panel, or are all options 'front' panel only?
Hi Atilla,
I will post some sketches of the panels tonight when I am back home, In short, the RCA one (Option 4) has only an USB connector on the front and the RCA jacks on the back, there is no other way to fit them in the enclosure otherwise.
The normal one (Option 3) has USB and 3.5mm on the front and a blank back plate.
Stefan
the mini usb is standard on all odac and at least i am also offering the connector.
i think that the new casing looks great, can't wait for the actual production items.
-joe
I meant to say 'mini USB cable' thanks, I'll edit my post. - Well can't seem to be able to edit my older post actually. How do I do that?
Last edited:
I meant to say 'mini USB cable' thanks, I'll edit my post. - Well can't seem to be able to edit my older post actually. How do I do that?
You are only allowed to edit your posts within 30 mins of originally posting it... got stuck on this hurdle a couple of times as well
Perfect!
Can I change my order option from 3 to 4 as well, in that case? Thanks!
Surely, changed it in the spreadsheet just now.
Stefan
the mini usb is standard on all odac and at least i am also offering the connector.
i think that the new casing looks great, can't wait for the actual production items.
-joe
EDIT:
the mini usb is standard on all odac and at least i am also offering the 3.5mm line out connector
i think that the new casing looks great, can't wait for the actual production items, I am going to have to get myself some
-joe
I received some pics of the re-run O2 cases today, looks much better
The ODAC cases will be brushed though, not sand blasted. As soon as I get some pics of th eO2 panels you can see how the surface finish will look like. Hopefully they will get it right this time, I sent them some close up pics of the OriginAE T21 enclosure I have here, soooo niceeee
and another one:
The ODAC cases will be brushed though, not sand blasted. As soon as I get some pics of th eO2 panels you can see how the surface finish will look like. Hopefully they will get it right this time, I sent them some close up pics of the OriginAE T21 enclosure I have here, soooo niceeee
An externally hosted image should be here but it was not working when we last tested it.
and another one:
An externally hosted image should be here but it was not working when we last tested it.
and here as promised teh panels available for the ODAC enclosure:
comination of those will fit all combinations
An externally hosted image should be here but it was not working when we last tested it.
comination of those will fit all combinations
Hi, thanks. You can state your wishes here or by mail using the link in the footer or by PMVery nice work, Swalter! Where do i sign up for 1 ODAC with the RCA option?
More info is available in Post #77
Stefan
Last edited:
ODAC ready to be shipped
good news, the ODAC will be delivered today. I will pack all orders of Option 1 today and send you the paypal invoice (or my PP address for those that did not provide their mail address) during the cause of this day.
As said, first ones to be shipped are the option 1 ones, Panels for Option two should arrive within a week so those will be next.
Options 3 and 4 will be shipped when the cases arrive and I actually built them
And before anyone is asking, yes, the extras ordered will ship with it when available, onlything pending are the cases, panels and batteries, the supplier for the batteries sent my order somewhere else... got suspicious when the tracking info stated delivered in Geneva.
I will take further pre-orders only until the cases arrive, thereafter the ODAC needs to be purchased in the shop.
Stefan
good news, the ODAC will be delivered today. I will pack all orders of Option 1 today and send you the paypal invoice (or my PP address for those that did not provide their mail address) during the cause of this day.
As said, first ones to be shipped are the option 1 ones, Panels for Option two should arrive within a week so those will be next.
Options 3 and 4 will be shipped when the cases arrive and I actually built them
And before anyone is asking, yes, the extras ordered will ship with it when available, onlything pending are the cases, panels and batteries, the supplier for the batteries sent my order somewhere else... got suspicious when the tracking info stated delivered in Geneva.
I will take further pre-orders only until the cases arrive, thereafter the ODAC needs to be purchased in the shop.
Stefan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- Head 'n' HiFi - Walter
- ODAC - European and Worldwide pre-orders