Hello guys
I have a plan for build of a OB hybrid WAW(FAST) system.
The woofer part is just OK, but I need some help for the 3,5" full-range TC9FD application. The crossover point is 400Hz 2nd order BW passive and baffle width is 260mm.
How could I make a simulation of the linear excursion related to voltage/power? WinISD or VituixCAD have no option for OB.
Does anybody know some appropriate software?
Many thanks in advance
I have a plan for build of a OB hybrid WAW(FAST) system.
The woofer part is just OK, but I need some help for the 3,5" full-range TC9FD application. The crossover point is 400Hz 2nd order BW passive and baffle width is 260mm.
How could I make a simulation of the linear excursion related to voltage/power? WinISD or VituixCAD have no option for OB.
Does anybody know some appropriate software?
Many thanks in advance
BASTA! will do it. There is also XLbaffle (I think that's right) that's a spreadsheet. Both are free.
I second Basta! It's more intuitive to use as it looks at first and most importantly, it did simulate baffle effects to the point.
Cool option is that you can use active filters, passive filters and at least one additional network.
I used it for a mixed passive, active system.
No need for other SW except for measurements and setting up the filter.
Cool option is that you can use active filters, passive filters and at least one additional network.
I used it for a mixed passive, active system.
No need for other SW except for measurements and setting up the filter.
Good Evening All,
I am trying to get to grips with Batsa! and it would speed things up if I was able to download the driver database; the link on the program sends me indirectly to here - 404 Not Found. This page is no longer supported. Therefore please can someone either direct me to the online version of the database or forward me a copy via PM. An online search has not been successful.😡
Thank you,
I am trying to get to grips with Batsa! and it would speed things up if I was able to download the driver database; the link on the program sends me indirectly to here - 404 Not Found. This page is no longer supported. Therefore please can someone either direct me to the online version of the database or forward me a copy via PM. An online search has not been successful.😡
Thank you,
Many thanks, downloaded.
Having looked at one of the files, it can't be too difficult to create my own from the relevant datasheet; there are no Lii Audio drivers there as well as a couple of others I intend to play around with.
Regards,
Having looked at one of the files, it can't be too difficult to create my own from the relevant datasheet; there are no Lii Audio drivers there as well as a couple of others I intend to play around with.
Regards,
I know you are asking for a design software (and to throw in there - Akabak can do open baffle very well but a steep learning curve). Have you considered the highly successful Manzanita OB speaker that uses TC9FD and a 15in woofer. I think the crossover point is similar to what you are looking for.
https://www.diyaudio.com/forums/mul...n-inexpensive-ob-project-250.html#post6507949
It’s a proven, well liked, “shovel ready” project.
This is the 15in variant (12in also exists):
https://www.diyaudio.com/forums/mul...n-inexpensive-ob-project-250.html#post6507949
It’s a proven, well liked, “shovel ready” project.
This is the 15in variant (12in also exists):