Hi All
I have three NOS Philips laser heads available. I believe these fit both the CDM0 and CDM1 mechs. Philips part number is 4822 A1 691 30123
I got them from a friend of a retired Philips engineer who had these left in his kit when he retired. The orignal packs had been opened to check their contents as the chap I got them from had no idea what was in them. The protective shorting foams are in place on the sensitive pins, so they should be fine.
(Note: these lasers require specialist ESD handling and skill to align correctly so be aware that these require an experienced tech to fit them correctly!)
These are now incredibly rare to find and are rare as hen's teeth!
I offer them on an *AS -IS* basis at a reasonable GBP65.00 each
+ shipping (UK GBP5, Europe GBP10, Elsewhere GBP12.50)
Elsewhere I've seen these advertised at GBP200+ so if you bought all three you'd have up to three lasers for the price of one, so to speak!
If you'd like one, or more, please send a PM..
Cheers.
Rob
I have three NOS Philips laser heads available. I believe these fit both the CDM0 and CDM1 mechs. Philips part number is 4822 A1 691 30123
I got them from a friend of a retired Philips engineer who had these left in his kit when he retired. The orignal packs had been opened to check their contents as the chap I got them from had no idea what was in them. The protective shorting foams are in place on the sensitive pins, so they should be fine.
(Note: these lasers require specialist ESD handling and skill to align correctly so be aware that these require an experienced tech to fit them correctly!)
These are now incredibly rare to find and are rare as hen's teeth!
I offer them on an *AS -IS* basis at a reasonable GBP65.00 each
+ shipping (UK GBP5, Europe GBP10, Elsewhere GBP12.50)
Elsewhere I've seen these advertised at GBP200+ so if you bought all three you'd have up to three lasers for the price of one, so to speak!
If you'd like one, or more, please send a PM..
Cheers.
Rob
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.