Yes. You can use both of them to get 26-0-26, I guess that would make it about 35V rectified, with 8ohm speakers and proper heatsink it should be fine. One of my chipamps is running on +/-36V after active filtering and 6ohm speakers, but I do not recommend that.
I will be pushing 150watt/8ohm speakers. I will have to use them together to get the power I want.
I guess i will be regulating the supply since i will have the needed overhead with 27v secondaries.
I guess i will be regulating the supply since i will have the needed overhead with 27v secondaries.
Last edited:
Connect the secondaries in series.
Leave the centre taps unconnected, but insulated.
You now have 26.5-0-26.5Vac at the mains voltage when you took your measurements.
If you do need an LV supply use one 13Vac and the series connection. That series connection is @ PSU Zero Volts.
Leave the centre taps unconnected, but insulated.
You now have 26.5-0-26.5Vac at the mains voltage when you took your measurements.
If you do need an LV supply use one 13Vac and the series connection. That series connection is @ PSU Zero Volts.
- Status
- Not open for further replies.