Already did that, and no issues. When the 4 wires just han in the air the right channel is silent and the left channel have noise. It's the same with cartridge connected and RIAA connected.
Did you swap the left and right turntable RCA plugs at the preamp inputs,
and verify that the noise changes channels?
Do the plugs fit tightly on the sockets?
REGA (and other cartridge/arm manufacturers) use prehistoric wiring methods.I have hum/noise from one channel of my Rega RB250. ...Will I just have to take it apart, and rewire?
This may help...
Good Luck!
Thanks. I have taken it apart, the solder work is very poor.
Might as well replace the wiring at this time.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Analogue Source
- Noise Rega standard RB250