Missed again !Dale do you have an extra set 2 driver and 4 output boards that you can sell ?
Thanks,Aidas
Thanks,Aidas
Aleph 2 boards
Hi Dale, I don't know if you got my mail asking for 2 drivers and 4 outputs, I'll pay you via a paypal. Thanks
Hi Dale, I don't know if you got my mail asking for 2 drivers and 4 outputs, I'll pay you via a paypal. Thanks
Hi,
I knew that I forgot to reply to someone. Yes, one guy was supposed to buy 8/20, but I am not going to wait anymore.
Yes, you can pay by paypal:
2 * 10 + 4 * 4 = 36/shipping 4.00 = 40.00
Paypal adds 1.20 = 41.20.
Id is dherman@ksaria.com
Best Regards,
Dale
P.S. They are all ready to send out.
I knew that I forgot to reply to someone. Yes, one guy was supposed to buy 8/20, but I am not going to wait anymore.
Yes, you can pay by paypal:
2 * 10 + 4 * 4 = 36/shipping 4.00 = 40.00
Paypal adds 1.20 = 41.20.
Id is dherman@ksaria.com
Best Regards,
Dale
P.S. They are all ready to send out.
paypal question
Dale I have to go to paypal.com and enter your id? sorry is because I new to this. Thanks
Dale I have to go to paypal.com and enter your id? sorry is because I new to this. Thanks
Hi Dale,
do have one pair of driver + output boards still available?
If yes, I could transfer the money via paypal on monday.
Would 4 $ shipping also apply for shipping to Europe?
Sorry if I ask questions that had been answered elsewhere already.
Thanks
Franz
do have one pair of driver + output boards still available?
If yes, I could transfer the money via paypal on monday.
Would 4 $ shipping also apply for shipping to Europe?
Sorry if I ask questions that had been answered elsewhere already.
Thanks
Franz
Hi Franz, porfi4ever,
Frantz, it looks like I will have some to sell. Unfortunately, shipping to Europe has been costing me about $6.00.
The other bad news is that Paypal charges 4% for international exchanges. So, the final cost would be $43.68
porfi4ever: Basically, you have to register at Paypal per their instructions and then "send money" to my email address of:
They will take the money from a bank account or from a credit card. Since you live in RI, perhaps, it would be easier to get a USPS money order. Just go to any post office and buy a money order from them. They take cash, CC, or debit.
dherman@ksaria.com
Frantz, it looks like I will have some to sell. Unfortunately, shipping to Europe has been costing me about $6.00.
The other bad news is that Paypal charges 4% for international exchanges. So, the final cost would be $43.68
porfi4ever: Basically, you have to register at Paypal per their instructions and then "send money" to my email address of:
They will take the money from a bank account or from a credit card. Since you live in RI, perhaps, it would be easier to get a USPS money order. Just go to any post office and buy a money order from them. They take cash, CC, or debit.
dherman@ksaria.com
honey there is a little nelson in my aleph-x
Dale, got my boards. They look great.
Just wait for that Aleph-X coming together.
Thanks again, robert.
Dale, got my boards. They look great.
Just wait for that Aleph-X coming together.
Thanks again, robert.
harvardian said:
Hi Dale,
Do you have 2 driver boards and 4 output boards left?
I can pay you the $ 43.68 with Paypal immediately!
If you would have 4 driver boards and 8 output boards left, I would even be more happy...
Greetings,
Lucas.
Hi!
I wonder why the transformer in the parts list is specified to 31-0-31V.
Is that correct for Aleph 2?(I thought you should use 37-0-37V)
Btw.
The boards arrived safe and sound(?) to Sweden and look great Dale. Thanks a lot!
(I am trying to convert it to Aleph 60 however, see my other thread)
Cheers
Mats
I wonder why the transformer in the parts list is specified to 31-0-31V.
Is that correct for Aleph 2?(I thought you should use 37-0-37V)
Btw.
The boards arrived safe and sound(?) to Sweden and look great Dale. Thanks a lot!
(I am trying to convert it to Aleph 60 however, see my other thread)
Cheers
Mats
Hi Mats,
I was probably being much too conservative. I ended up buying larger ones myself. Sorry about the confusion.
I am using a 10mH/10A choke and am getting +/-45V rails.
There is no hum and very little ripple.
Dale
I was probably being much too conservative. I ended up buying larger ones myself. Sorry about the confusion.
I am using a 10mH/10A choke and am getting +/-45V rails.
There is no hum and very little ripple.
Dale
Aleph 2 transformer
Dale-
I am a bit confused too. Plitron has the 107019201 (33-0-33), the 10718201 (35-0-35) and 10735201 (38-0-38). Is there a preferred transformer here? Or is it a function of what the rest of the PS is comprised?
Steve
BTW, what does your PS look like? I have seen quite a large variation in design from that shown on the Pass website to the supply design on Kristijan's site.
Dale-
I am a bit confused too. Plitron has the 107019201 (33-0-33), the 10718201 (35-0-35) and 10735201 (38-0-38). Is there a preferred transformer here? Or is it a function of what the rest of the PS is comprised?
Steve
BTW, what does your PS look like? I have seen quite a large variation in design from that shown on the Pass website to the supply design on Kristijan's site.
Hi Steve,
I bought some custom 37VAC from Victotia Magnetics.
I use dual rectifiers as the Kristian schematic...
Dale
I bought some custom 37VAC from Victotia Magnetics.
I use dual rectifiers as the Kristian schematic...
Dale
- Status
- Not open for further replies.