Hi everyone,
Some of you may have used the old version 1.x of DIYLC to draw stompbox layouts or the newer version 2.x that's supposed to draw amp layouts and schematics as well, but did it badly. Anyways, the new version 3 is developed from scratch to offer better performance and ability to draw pretty much anything. It's still under development, so component set is not very rich, but I encourage everyone to try it out and give some feedback. I want to iron out usability issues and make it as comfortable to use as possible to wide audience - pedal makers, amp makers, hi-fi folks...any DIY enthusiasts really.
You can find the latest version here, as well as some documentation diy-layout-creator - Project Hosting on Google Code
If you have any ideas you can either reply here, pm me or, even better, use "Report Bugs" feature and file a ticket with description of your requests or issues.
All the best,
Bane
Some of you may have used the old version 1.x of DIYLC to draw stompbox layouts or the newer version 2.x that's supposed to draw amp layouts and schematics as well, but did it badly. Anyways, the new version 3 is developed from scratch to offer better performance and ability to draw pretty much anything. It's still under development, so component set is not very rich, but I encourage everyone to try it out and give some feedback. I want to iron out usability issues and make it as comfortable to use as possible to wide audience - pedal makers, amp makers, hi-fi folks...any DIY enthusiasts really.
You can find the latest version here, as well as some documentation diy-layout-creator - Project Hosting on Google Code
If you have any ideas you can either reply here, pm me or, even better, use "Report Bugs" feature and file a ticket with description of your requests or issues.
All the best,
Bane
Version 3.0.4 is released.
If you're running older version 3.0.x, you should be able to see the yellow light bulb in the bottom left corner indicating that updates are available. Click on it gives the list of changes and download link. From now on, I'll keep that feed updated.
After I released 3.0.4, I found that editing numerical values is messed up. I'll fix that in the next round, but there should be enough good stuff in this version to make it worth checking out.
diylc-3.0.4-alpha.zip - diy-layout-creator - DIYLC 3.0.4 Alpha (multi-platform) - Project Hosting on Google Code
Cheers,
Bane
If you're running older version 3.0.x, you should be able to see the yellow light bulb in the bottom left corner indicating that updates are available. Click on it gives the list of changes and download link. From now on, I'll keep that feed updated.
After I released 3.0.4, I found that editing numerical values is messed up. I'll fix that in the next round, but there should be enough good stuff in this version to make it worth checking out.
diylc-3.0.4-alpha.zip - diy-layout-creator - DIYLC 3.0.4 Alpha (multi-platform) - Project Hosting on Google Code
Cheers,
Bane
no, not yet. I'm working on extending component set. I added to-92 and to-220 transistors today 🙂
Just a suggestion, how about makes the wiring as a group system, not a components. If I placing resistors leads to IC's leads they are bonded instantly.
As reference is CADint, it groups the wires. (free demo download, you may use it as your reference).
You make it alone? I ever try to make another one alone with Qt3, then I giving up😀.
Keep going, java are simpler one.
As reference is CADint, it groups the wires. (free demo download, you may use it as your reference).
You make it alone? I ever try to make another one alone with Qt3, then I giving up😀.
Keep going, java are simpler one.
If I understood correctly, that's how it's already done. When you connect two components they stick together until you unstuck them.
And yes, I'm doing it myself.
Thanks,
Bane
And yes, I'm doing it myself.
Thanks,
Bane
Does anyone know if a similar program for mac exists?
I'm new to this and apologies if I ask about something that everyone else knows..
I'm new to this and apologies if I ask about something that everyone else knows..
I bookmarked your site and will attempt to try out your program next weekend, time permitting.
When it comes to computer software I'm a moron.
When it comes to computer software I'm a moron.
FIY - I added tube sockets today along with several options in Config menu that are supposed to make work smoother and easier.
As always, you can find the latest version here Downloads - diy-layout-creator - Project Hosting on Google Code
Cheers,
Bane
As always, you can find the latest version here Downloads - diy-layout-creator - Project Hosting on Google Code
Cheers,
Bane
thank you very much!
i´ve been using your first version for
years! and until now it has been very
valuable tool for me. thanks again.
i´ll uninstall old version first, ok?
glad to meet nice people.
martin martinez
uruapan michoacan
i´ve been using your first version for
years! and until now it has been very
valuable tool for me. thanks again.
i´ll uninstall old version first, ok?
glad to meet nice people.
martin martinez
uruapan michoacan
Hi everyone,
Last couple of months I've been adding some cool features and improvements to DIYLC, feel free to give it a try and let me know if you have any comments or suggestions.
Here's the link. It's completely free, works on win, unix, mac https://github.com/bancika/diy-layout-creator/releases/latest
Cheers,
Bane
PS @Project16, long overdue response, but you were using an ancient version of the app. Since 2011, the current version is 3rd generation.
Last couple of months I've been adding some cool features and improvements to DIYLC, feel free to give it a try and let me know if you have any comments or suggestions.
Here's the link. It's completely free, works on win, unix, mac https://github.com/bancika/diy-layout-creator/releases/latest
Cheers,
Bane
PS @Project16, long overdue response, but you were using an ancient version of the app. Since 2011, the current version is 3rd generation.
- Status
- Not open for further replies.