Here we go!
Now it needs the right innerdiameter
Now it needs the right innerdiameter
An externally hosted image should be here but it was not working when we last tested it.
🙂
The first ventport is done, it looks very cool! It'll work just perfect in Piccolo Mostro III. Here's a question for ya, you know what Piccolo Mostro means? 😉
I mean : it doesn't have to stand an huge pressure ,total force is given by the two 4" paper cones . I just think it is oversized in terms of Q(quality)/P
(pounds ,the weight ) .
That's all !!
🙂
(pounds ,the weight ) .
That's all !!
🙂
Well, it does not have to cost much (Read a lot) to sound good, as long as you do it right. For an example, I think Marten Design sounds terrible and they cost very much!! And lot of Canton speakers... to say a few brands 🙂
I have heard many brands costing 1/8 sounding better
I specified the weight ,referring to 'pound' . Are you going to make flared shape ends in the duct ? Does it fire backwards or downwards ?
The ends are at 30 degree angle, pointing downwards 🙂 Will show a photo of my first complete port tonight 🙂
One done, one to go 🙂
An externally hosted image should be here but it was not working when we last tested it.
That's not a proper 'flare' . Or it is ? It may be ...
I had an idea not yet copyrighted 🙄
You could use a steel plate with an L shape , the vertical part supports the drivers ,the horizontal one has the duct in it ,and the spikes on it . Clever ,ha ?
the enclosure is 1 cm plexy ,(with transparent aerogel foam ,very chic!),binding posts on the rear .
Just for an idea ...if no sound absorber would to be used (either if white dacron may be...sexy !!)
I had an idea not yet copyrighted 🙄
You could use a steel plate with an L shape , the vertical part supports the drivers ,the horizontal one has the duct in it ,and the spikes on it . Clever ,ha ?
the enclosure is 1 cm plexy ,(with transparent aerogel foam ,very chic!),binding posts on the rear .
Just for an idea ...if no sound absorber would to be used (either if white dacron may be...sexy !!)
These speakerterminals is mine in a couple of weeks 🙂 🙂
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
This is like building a house this way:
1. Selecting and buying all the wall paint.
2. Picking out the colour of the window curtains.
3. Doing at that other boring stuff (ie. foundation, floor, walls, roof, etc)
🙁
1. Selecting and buying all the wall paint.
2. Picking out the colour of the window curtains.
3. Doing at that other boring stuff (ie. foundation, floor, walls, roof, etc)
🙁
Not at all!
I have all the walls, baffle, drivers, boxvolume ready.
I have it here in my home 🙂
I have not left out anything, of course is the sound prio nr 1
Little Monster! (OK, so I had to use Googe Translate.) 😉
This is an interesting thread so far. I'm keen to see the completed project!
- Status
- Not open for further replies.