The calculations of Xc are messed up by me applying a square wave.
In this case Xc is probably irrelevant.
Although Xl wont be.
In this case Xc is probably irrelevant.
Although Xl wont be.
Got pcb's in today.
Built one up and calibrated it to 47R resistor.
Series resistor is 47r so 47r in place of cap gives 2.5 volts AC out.
This gives 1.25 volt peaks out of precision rectifier.
Works fine.
Tested with some lower resistors too and they came up fine.
Sadly I dont have any bad capacitors to test.
Built one up and calibrated it to 47R resistor.
Series resistor is 47r so 47r in place of cap gives 2.5 volts AC out.
This gives 1.25 volt peaks out of precision rectifier.
Works fine.
Tested with some lower resistors too and they came up fine.
Sadly I dont have any bad capacitors to test.
Added a history list box so you can see patterns if testing batches of capacitors.
Also rearranged screen a little.
Also rearranged screen a little.