Here is the link to the EBAY ad. It sure looks sweet for the cost.
http://cgi.ebay.com/FFYX-934-100-Hi...ef7b09574&_trksid=p3286.c0.m14#ht_2702wt_1247
http://cgi.ebay.com/FFYX-934-100-Hi...ef7b09574&_trksid=p3286.c0.m14#ht_2702wt_1247
Last edited:
I wonder what a zocle is?
A socle is a plinth used to support a statue or column.
Forget about this turntable, it is a joke between all China audio forums
Can you elaborate on this 'joke' a bit?
Try and build someting like this at his asking $ and get back to us.
Or you can spend 8 to 10K more on a Basis and be happy as a clam knowing the details are worked out.
Somewhere out there is a DIYer who will take this apart and fix any issues and pocket the difference...
Regards
David
Or you can spend 8 to 10K more on a Basis and be happy as a clam knowing the details are worked out.
Somewhere out there is a DIYer who will take this apart and fix any issues and pocket the difference...
Regards
David
Acrylic is widely used in audio apparently for it looks and not it sonic qualities.
It must have some value, as LP's are made from it if I recall correctly
What? Acrylic is probably the best non resonant material one could use to damp any contributing vibrations.
Take a piece of this and hang it on a string and smack it with a hammer and compare it with just about anything else and you'll get the picture. Beauty is more than skin deep on this one.
Regards
David
Take a piece of this and hang it on a string and smack it with a hammer and compare it with just about anything else and you'll get the picture. Beauty is more than skin deep on this one.
Regards
David
Rui Borges Turntables
If you guys are interested in a good turntable, don't look no further.
Rui Borges Turntables
Portuguese specialist, makes one high-end deck by order
"Visita a Rui Borges Turntables"
http://www.audiomania.com.pt/index.php?topic=2881.0;all
If you guys are interested in a good turntable, don't look no further.
Rui Borges Turntables
Portuguese specialist, makes one high-end deck by order
"Visita a Rui Borges Turntables"
http://www.audiomania.com.pt/index.php?topic=2881.0;all
If you guys are interested in a good turntable, don't look no further.
Rui Borges Turntables
Portuguese specialist, makes one high-end deck by order
"Visita a Rui Borges Turntables"
http://www.audiomania.com.pt/index.php?topic=2881.0;all
Well I have no idea how it sounds, but it looks fantastic!
Yeah, and VPI has recently switched to aluminum because it's becoming harder to find good quality acrylic (According to them). I love my VPI Scoutmaster table, both in the way it looks and sounds.
The original HW-19 was Al. It is amazing to see each year at least 3 or 4 of these one off ultra-highend TT's.
I believe LPs are made from vinyl (PVC).
I stand corrected (egg all over face).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Analogue Source
- New acrylic TT from China on EBAY -Anyone actually heard one?