Boards arrived today with thanks.
Very nice indeed.
Has anyone already have the following ?
-- Bills of Material (perhaps also with Mouser or Digikey nos.)
-- Circuit diagrams
-- Component layouts on PCB
Thx,
Patrick
Very nice indeed.
Has anyone already have the following ?
-- Bills of Material (perhaps also with Mouser or Digikey nos.)
-- Circuit diagrams
-- Component layouts on PCB
Thx,
Patrick
Will send them to you by email, probably today.
Oh, everyone got some more small boards for free in the package...
I need to give you a drawing of how to put the clock adaptor on the board too.
Oh, everyone got some more small boards for free in the package...
I need to give you a drawing of how to put the clock adaptor on the board too.
Hello,
the boards arrived today.
everithing OK
Thanks a lot.
I'm waiting for your info email.
Ciao
Guglielmo
the boards arrived today.
everithing OK
Thanks a lot.
I'm waiting for your info email.
Ciao
Guglielmo
hi,
can somebody who got the mail open the the Mainboard.pdf? -there seems to be a problem with mine..
if, would you please forward it to: nick.knattertoni@gmail.com
br
Daniel
can somebody who got the mail open the the Mainboard.pdf? -there seems to be a problem with mine..
if, would you please forward it to: nick.knattertoni@gmail.com
br
Daniel
I don t know what happened! it read fine on my computer. I don t have m'y files right know with me and won t be able to resend it before next saturday. I really am sorry. Hope you can already solder them and guess the schematics. Sorrry again . Nicolas
Without a bill of materials, it's a bit difficult to get parts.
We look forward to revised files when you get home.
Patrick
We look forward to revised files when you get home.
Patrick
Hi,
Don't worry too much Nicolas - the rest of the files work fine for me, it's only the main DAC schematic PDF which appears blank? Most of the pinouts are in the build guide though, and you can work out the rest from the ES9008 datasheet (hint - G**gle).
I was wondering though, can anyone suggest any cheaper capacitors and 80MHz clock? I'm just looking to get my amp build up-and-running first, and I'll get the more expensive parts at a later date.
On Farnell (in the UK), the Cornell Dubilier caps are only available from the US, and this costs £15 extra for each order! They're also a tad expensive for me atm. So, would these aluminium caps be OK for testing (footprint may be a bit small)?...
http://uk.farnell.com/jsp/search/productdetail.jsp?sku=1244388
Or, would only solid caps be recommended at all?
Also, would any of these oscillators be particularly nasty for audio (just for initial testing though)?...
http://uk.farnell.com/jsp/search/br...4&Ntk=gensearch_001&Ntt=80MHZ+oscillator&Ntx=
Regards,
OzOnE.
EDIT: Oh, and thanks for your hard work on the PCBs, I can see they have been well thought out.
Don't worry too much Nicolas - the rest of the files work fine for me, it's only the main DAC schematic PDF which appears blank? Most of the pinouts are in the build guide though, and you can work out the rest from the ES9008 datasheet (hint - G**gle).
I was wondering though, can anyone suggest any cheaper capacitors and 80MHz clock? I'm just looking to get my amp build up-and-running first, and I'll get the more expensive parts at a later date.
On Farnell (in the UK), the Cornell Dubilier caps are only available from the US, and this costs £15 extra for each order! They're also a tad expensive for me atm. So, would these aluminium caps be OK for testing (footprint may be a bit small)?...
http://uk.farnell.com/jsp/search/productdetail.jsp?sku=1244388
Or, would only solid caps be recommended at all?
Also, would any of these oscillators be particularly nasty for audio (just for initial testing though)?...
http://uk.farnell.com/jsp/search/br...4&Ntk=gensearch_001&Ntt=80MHZ+oscillator&Ntx=
Regards,
OzOnE.
EDIT: Oh, and thanks for your hard work on the PCBs, I can see they have been well thought out.
Hello yes the bom is in thé build guide. Will sdnd you when i cet back. For caps, Check it on mouser you can easily get free shipping . You can solder sanyo os cons leaded on the pads. For clock, if you can fit it ... I would not recommend switching components thou. Tell me if you have problems. Nicolas.
Thanks, Nicolas...
I didn't realize that Mouser had a UK order site now, so I'll buy all the bits on the BOM. I'm now just trying to decide which gadget I can buy to qualify for free postage (I don't need the pin headers etc.) - alas, I'm a poor person atm! 😉
It might be a while until I get things running again as I'm having problems with drilling the heatsinks for my amps etc. I hope to get at least the Sabre working with the RevC amps soon though.
OzOnE.
I didn't realize that Mouser had a UK order site now, so I'll buy all the bits on the BOM. I'm now just trying to decide which gadget I can buy to qualify for free postage (I don't need the pin headers etc.) - alas, I'm a poor person atm! 😉
It might be a while until I get things running again as I'm having problems with drilling the heatsinks for my amps etc. I hope to get at least the Sabre working with the RevC amps soon though.
OzOnE.
I sent you the correct file for schematics.
Feel free to ask me any question or additional document, thought I can't see what more you would need.
Thank you,
Nicolas
Feel free to ask me any question or additional document, thought I can't see what more you would need.
Thank you,
Nicolas
No time yet. Have to wait until cold Winter.
Thanks for asking.
Shall probably need help later, especially with the uP for setup config.
Best regards,
Patrick
Thanks for asking.
Shall probably need help later, especially with the uP for setup config.
Best regards,
Patrick
- Status
- Not open for further replies.