I have two
Pioneer TS-G1630 80Wmax 20Wnorm 4ohm
and two Subs
TS-W201F 250W max 100Wnorm 4ohm
and I would like to make two subwoofers and
two bookshelf sized speakes with these!🙄
I dont know how to calculate internal volume, Dimentions,
Port Size, Port Location and so on
I also dont know how to determine wich in Vented or Sealed
enclosures will be best for these speakers!
I was hoping to use WinISD but it doesn't have my Speaker Parameters! & I could not locate them anywhere!
So Can you plese help me in the dimensions and what type of enclosures to use!
I'd like to use them in my sound system! as I dont have decent speakers!
Pioneer TS-G1630 80Wmax 20Wnorm 4ohm
and two Subs
TS-W201F 250W max 100Wnorm 4ohm
and I would like to make two subwoofers and
two bookshelf sized speakes with these!🙄
I dont know how to calculate internal volume, Dimentions,
Port Size, Port Location and so on

I also dont know how to determine wich in Vented or Sealed
enclosures will be best for these speakers!
I was hoping to use WinISD but it doesn't have my Speaker Parameters! & I could not locate them anywhere!
So Can you plese help me in the dimensions and what type of enclosures to use!

I'd like to use them in my sound system! as I dont have decent speakers!

If you cant find the specs for the drivers. Id say put the subs in 30 litre sealed boxes each (most cheap car audio subs like around 30 litres). Make the bookshelfs like 10 litres sealed at most.
An externally hosted image should be here but it was not working when we last tested it.
looks ok in a 35L vented enclosure. The mids would go well in a vented setup too but without being able to test one I'd only be guessing on box volume/port length, 10L sealed as previously suggested is close enough given lack of parameters.
Thanks!😎
Can I place the woofer anywhere?
how big does the vent have to be?
Does it matter where it is located?
Can you provide dimensions for 10L!
Thanx!
😎 
Can I place the woofer anywhere?

how big does the vent have to be?

Does it matter where it is located?

Can you provide dimensions for 10L!
Thanx!


The woofer can go anywhere but the Bassbox calculations assume that the port is on the same face of the box as the woofer, or close to it at least.
the vent dimentions are under the "box properties" in the pic.
Dv = diameter
Lv = length
An optimum 10L enclosure is 348mm x 215mm x 133mm, all dimentions internal, same for the woofer enclosure.
the vent dimentions are under the "box properties" in the pic.
Dv = diameter
Lv = length
An optimum 10L enclosure is 348mm x 215mm x 133mm, all dimentions internal, same for the woofer enclosure.
Attachments
Thanks EveryBody All Coverd
I Think!?
I'm off to build Them!
Hoping they Sound Good in the house
(Like they Use to in my Car)
I will post pics and OutCome!


I Think!?

I'm off to build Them!

Hoping they Sound Good in the house
(Like they Use to in my Car)
I will post pics and OutCome!



- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- Need to MAke Pioneer Spekers