I am asking for links to FAQs, please. I have not found any good databases that answer my questions. Hopefully, someone can point me at some FAQs so I don't have to pester the knowledgeable folks in these forums with beginner stuff.
Background:
I have an AS in electronics, but all my work experience has been in computers / data communications. I'm tackling a Gainclone project (from ChipAmp.com), with a scratch built tone control based on the LM1036. I want to get this right, and it would be less than pointless to build a system whose best characteristic is amplifying 60Hz hum.
I have oodles of basic questions, like should I use shielded twisted pair for all line level signals, and if so, how do I accomplish proper grounding. Other questions like whether or not I need audiophile caps in the tuning circuitry of the LM1036 (I can only make an educated guess).
Thanks in advance for any help you can offer!!!
Background:
I have an AS in electronics, but all my work experience has been in computers / data communications. I'm tackling a Gainclone project (from ChipAmp.com), with a scratch built tone control based on the LM1036. I want to get this right, and it would be less than pointless to build a system whose best characteristic is amplifying 60Hz hum.
I have oodles of basic questions, like should I use shielded twisted pair for all line level signals, and if so, how do I accomplish proper grounding. Other questions like whether or not I need audiophile caps in the tuning circuitry of the LM1036 (I can only make an educated guess).
Thanks in advance for any help you can offer!!!
Use the search at the bottom of the page and take your time, and I would use shielded twisted pair.
- Status
- Not open for further replies.