Below is my evaluation:
PIC12F629
pin 1 connected to VDD
pin 2 connected to PMD200 pin 18 SPI/I2C
pin 3 tied HIGH connected to PMD200 pin 26 SCL
pin 4 seems no connection
pin 5 connected to GND
pin 6 tied HIGH connected toPMD200 pin 25 SDA
pin 7 tied LOW connected to PMD200 pin 29 RESET
pin 8 connected to GND
Pulse waveforms can be observed on pin 3, 4, 6 and 7.
PIC12F629 is always working and does not go to sleep.
So that PMD200 is not properly set up at all.
Can anybody help me fix this problem?
PIC12F629
pin 1 connected to VDD
pin 2 connected to PMD200 pin 18 SPI/I2C
pin 3 tied HIGH connected to PMD200 pin 26 SCL
pin 4 seems no connection
pin 5 connected to GND
pin 6 tied HIGH connected toPMD200 pin 25 SDA
pin 7 tied LOW connected to PMD200 pin 29 RESET
pin 8 connected to GND
Pulse waveforms can be observed on pin 3, 4, 6 and 7.
PIC12F629 is always working and does not go to sleep.
So that PMD200 is not properly set up at all.
Can anybody help me fix this problem?
Last edited:
From your post, you describe some connections between the PMD200 and the PIC12F, and the conclusion that the PMD200 is not properly set up. Why do you draw that conclusion? What problem do you have?