Hello all
I new to modding currently working on my marantz 67, got me interested in doing some work on my 114 pre and 214 power amps.
Can someone post the schematic on here for all to share?
I'm not an elec engineer just a guy with an iron so any tips ie what caps to replace values etc would be warmly welcomed.
Cheers all 😀
I new to modding currently working on my marantz 67, got me interested in doing some work on my 114 pre and 214 power amps.
Can someone post the schematic on here for all to share?
I'm not an elec engineer just a guy with an iron so any tips ie what caps to replace values etc would be warmly welcomed.
Cheers all 😀
padman said:Hello all
I new to modding currently working on my marantz 67, got me interested in doing some work on my 114 pre and 214 power amps.
Can someone post the schematic on here for all to share?
I'm not an elec engineer just a guy with an iron so any tips ie what caps to replace values etc would be warmly welcomed.
Cheers all 😀
What is it that you want to fix in it? 🙂
Hi Flexq
Its not broken but i have had such amazing results changing small parts in the cd thought the same principles could apply to the amps.
Having a schematic helps following tracks etc
Gaining the most from what i've got is the aim of the game😉
Cheers Ian
Its not broken but i have had such amazing results changing small parts in the cd thought the same principles could apply to the amps.
Having a schematic helps following tracks etc
Gaining the most from what i've got is the aim of the game😉
Cheers Ian
Hi Guys, could you please email me the manual for a NAD 214/216 too? Please email computerwala @ yahoo. com. Thanks for sharing.
Could someone send me a copy too please
Can someone please send a copy my way too.
robinpollard AT onebox DOT com
Many thanks,
R.
Can someone please send a copy my way too.
robinpollard AT onebox DOT com
Many thanks,
R.
Hi Guys...
After the mod of 214, any comments on the power amp as i aslo keen to mod it.
many thanks
After the mod of 214, any comments on the power amp as i aslo keen to mod it.
many thanks
Hi Guys
If you want a copy, i will not read this thread or get emails when you post it. So contact me on flexq.87 _AT) gmail com
I will send it to you as soon as possible.
Henrik
If you want a copy, i will not read this thread or get emails when you post it. So contact me on flexq.87 _AT) gmail com
I will send it to you as soon as possible.
Henrik
Here is schematics of many amplifiers including nad 214:
Free Diagrams, Schematics and Service Manuals
Free Diagrams, Schematics and Service Manuals
Here are all NAD service manuals with schematics:
Nad Diagrams, Schematics and Service Manuals for FREE
Nad Diagrams, Schematics and Service Manuals for FREE
Nad Diagrams, Schematics and Service Manuals for FREE
Nad Diagrams, Schematics and Service Manuals for FREE
Nad 214/216 Audio Crackling and volume issue
Hi you guys.
I know this tread is very old, but you guys seem very knowledgeable about the NAD 214 and 216 amplifiers. I have one of each, and both are slowly but steadily developing a serious sound quality problem.
The right channel on both amps sometimes starts to crackle quite a lot and the right channel volume fades in and out. At times it goes completely quiet.
I can usually bring the sound back by turning up the volume a lot, but once lowered again the problem normally comes back after a few seconds or minutes.
Searching the net seems to point towards the speaker output relays being worn out/oxidised and needing replacement. Does that sound plausible to you guys?
If so, does anyone know the model/make of the relays and where to get some new ones? Im fairly confident with a soldering iron, so i'm up to task of trying the exchange them myself 🙂
Does ony of you perhaps have a diagram or photo showing the location of the components on the circuit boards?
I really hope you can help me, and thanks for your efforts.
-Tue
PS: I'm from denmark, so answers in danish is just fine (I saw a lot of you were from denmark).
Hi you guys.
I know this tread is very old, but you guys seem very knowledgeable about the NAD 214 and 216 amplifiers. I have one of each, and both are slowly but steadily developing a serious sound quality problem.
The right channel on both amps sometimes starts to crackle quite a lot and the right channel volume fades in and out. At times it goes completely quiet.
I can usually bring the sound back by turning up the volume a lot, but once lowered again the problem normally comes back after a few seconds or minutes.
Searching the net seems to point towards the speaker output relays being worn out/oxidised and needing replacement. Does that sound plausible to you guys?
If so, does anyone know the model/make of the relays and where to get some new ones? Im fairly confident with a soldering iron, so i'm up to task of trying the exchange them myself 🙂
Does ony of you perhaps have a diagram or photo showing the location of the components on the circuit boards?
I really hope you can help me, and thanks for your efforts.
-Tue
PS: I'm from denmark, so answers in danish is just fine (I saw a lot of you were from denmark).
- Status
- Not open for further replies.
- Home
- Amplifiers
- Solid State
- NAD 214 schematics