• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

My_Ref Fremen Edition GB (sixth run)

Status
Not open for further replies.
Jump to Latest
#83
Thanks Dario for this wonderful pcb set and though late, I finished assembling mine and is singing heavenly.

I got dc offset of 1.2mv and 1.3 mv on both boards.

When i switched on one board for some reason one of the rectifier diodes smoked and I had to replace it.

After replacement of this, all is well and i get a nice click sound of relays.. and superb sonics. Am driving it with a 0-24v x 2, 7Amp each toroidal for both boards.. yet to put this in its own cabinet 🙂

Many thanks for providing super quality pcbs 🙂

IMG_20151129_112439_zpsdhd6tuda.jpg Photo by rbalu72 | Photobucket
IMG_20151129_112429_zps9pbacr9a.jpg Photo by rbalu72 | Photobucket
IMG_20151129_112418_zpste4mwzoa.jpg Photo by rbalu72 | Photobucket
 
#84
rbalu72 said:
Thanks Dario for this wonderful pcb set and though late, I finished assembling mine and is singing heavenly.

I got dc offset of 1.2mv and 1.3 mv on both boards.

When i switched on one board for some reason one of the rectifier diodes smoked and I had to replace it.

After replacement of this, all is well and i get a nice click sound of relays.. and superb sonics. Am driving it with a 0-24v x 2, 7Amp each toroidal for both boards.. yet to put this in its own cabinet 🙂

Many thanks for providing super quality pcbs 🙂

IMG_20151129_112439_zpsdhd6tuda.jpg Photo by rbalu72 | Photobucket
IMG_20151129_112429_zps9pbacr9a.jpg Photo by rbalu72 | Photobucket
IMG_20151129_112418_zpste4mwzoa.jpg Photo by rbalu72 | Photobucket
Click to expand...

🙂
 
Status
Not open for further replies.
Top Bottom