Typically that's done when there is Zero stock and no expectations of any arriving in the near future
First of all, sorry for the very long delay.
I've had some very busy weeks at work but finally I've been able to complete the soldering work and boards are ready to ship, I should be able to ship all parcels by this saturday.
I've had some very busy weeks at work but finally I've been able to complete the soldering work and boards are ready to ship, I should be able to ship all parcels by this saturday.
Hi Dario, I got one question regarding BOM components. May I use G5LE-1-E-36-DC24 relay instead of proposed G5LE-14-DC24? The thing is that G5LE-14-DC24 will be not available in foreseeable future. Thanks for an answer.
No, it's a 36V relay VS the 24V one in BOM.
In BOM, there is an alternate code: 653-G5LE-1-DC24
There are 6 available, act soon... 😉
36 after E stands for 360mW instead of 400mW for the one without 36, I think you can use G5LE-1-E-36-DC24. This is also rated at 16A instead of 10A (E letter), see G5LE datasheet
Extra boards are available at same conditions as the last GB (price, shipping, etc.), just PM me.
Hello Dario, are there still any boards left? I would need 1 kit.
If no i will wait until next batch.
Best regards, Jarkko.
If no i will wait until next batch.
Best regards, Jarkko.
Hello Dario, I’m going to start soldering the boards but has a question about c13 , which capacitor do you recommend? In one of the bom I red to use a clarity 200 ohm if use IH, I bought those but they are tiny so I’m confused, please let me know which one is the best to use (regardless price). Thanks in advance.
As indicated in my signature, sure, I still have extra boards, same price as per the GB. PM me your PayPal email address and your country to receive the invoice.
I'm confused too... what do you mean? Could you eventually post a pic?
The suggested base cap is Clarity Cap CSA 1uF, the better option Clarity Cap CMR 1uF.