my new amp build

[stridor]

Built an amp based on this schematic. I eliminated the first 6sl7 and and the input labeled 2. I used a 6sf5 for one input, and for the input labeled three I used a 6sj7 like the mic input for a valco 1200, as shown here. I also bypassed the cathodes on the second 6sl7 with a 10uf capacitor.

This way I have one triode input and one pentode input

 

[DeathRex]

You can't bypass the cathodes on the second 6SL7, because it's a phase splitter, you'll have nothing going to the bottom 6L6.

Edit: Oh wait, I see the input to the bottom half of the 6SL7.

I supposed this is for use with guitar, since there is no feedback?

 

[stridor]

correct

 

[djgibson51]

And it sound like....?

 

[stridor]

been trying hard to get a sound clip up here, I can't figure out how. I may have to revert to youtube.

 

[stridor]

lets try this https://drive.google.com/file/d/0ByQ2MKjeJYVibjVfaGJWRGMzcG8/view?usp=sharing

 

[pdavis68]

Nice Fendery sound! Sounds like you're ready to start a rockabilly band.

 

[AudioFreak88]

These Circuits are not to be Changed by the Serviceman hahaha good one haha

 

[bilal malik]

it was my final year project (Y)

 

[VMUNIX]

lets try this https://drive.google.com/file/d/0ByQ2MKjeJYVibjVfaGJWRGMzcG8/view?usp=sharing

Triode or pentode input ?

 

[stridor]

Both, but the clip is triode input. The pentode input is a little darker, but more, robust I guess.