An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Sorry for the poor images, dont really have good lighting in here, and not so skilled with the camera.
Took those photos in my room, which is kinda dark, only got a single incandescent light on the ceiling, and it was already dark outside, so the flash was necessary. What you see is what I got, 6 boards, 4 for BUF634u or OPA551, 2 groundplaned, 2 not, and 2 boards with groundplane for Intersil HA5002 buffers.
Those look pretty decent. Hard to really tell until you start stuffing / soldering, and whether you find any hairline cracks etc.
Better than home etching, anyway. Maybe I'll give Olimex a shot sometime in the near future.
http://www.olimex.com/pcb/index.html
Better than home etching, anyway. Maybe I'll give Olimex a shot sometime in the near future.
http://www.olimex.com/pcb/index.html
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Headphone Systems
- My DIY headphone amplifier design