Very interesting. I am wondering where you get the microcontroller from. Use one from an old player or did you
write the software yourself ?
Any plans on series production? 😀 😀
write the software yourself ?
Any plans on series production? 😀 😀
hi purer,
- For what CDM4 units is your PCB?
- What does the circuit do?
- What do you need in addition for a complete CDP?
- What interfaces does it provide?
- For what CDM4 units is your PCB?
- What does the circuit do?
- What do you need in addition for a complete CDP?
- What interfaces does it provide?
Hats off gentlemen !
This a *really* great achievement Purer, congratulations ! A monks work if I may say so. I've got a hunch you design PCB's/cdplayers/dvdplayers for a living because this board surpasses DIY big time. If you need volounteers for testing the board I am in. Just as Guido I am curious about the software. I wonder also if you have a source for new CDM 4's as availability is bad ( in Europe anyhow ).
If I look carefully at the board I think you've included SPDIF but no DAC which is fine. It is designed for CDM4/19 I guess. As it looks the board won't fit in a standard Philips/Marantz cdplayer so a new case is needed. Any plans for that as well ? ( Peter Daniel, are you listening ? 😉 )
Can you give an estimated price for the board/kit ( I truely hope your pcb will be for sale ) and schematics/more details ??
Best regards,
Jean-Paul
This a *really* great achievement Purer, congratulations ! A monks work if I may say so. I've got a hunch you design PCB's/cdplayers/dvdplayers for a living because this board surpasses DIY big time. If you need volounteers for testing the board I am in. Just as Guido I am curious about the software. I wonder also if you have a source for new CDM 4's as availability is bad ( in Europe anyhow ).
If I look carefully at the board I think you've included SPDIF but no DAC which is fine. It is designed for CDM4/19 I guess. As it looks the board won't fit in a standard Philips/Marantz cdplayer so a new case is needed. Any plans for that as well ? ( Peter Daniel, are you listening ? 😉 )
Can you give an estimated price for the board/kit ( I truely hope your pcb will be for sale ) and schematics/more details ??
Best regards,
Jean-Paul
Paul
Microcontroller is from old player. This is my third -time testing board and I am now testing for the last time.I will give my exact sch and price when I finish it.Also I will send you the kit or the finishded product.
Yours,
Purer
Microcontroller is from old player. This is my third -time testing board and I am now testing for the last time.I will give my exact sch and price when I finish it.Also I will send you the kit or the finishded product.
Yours,
Purer
project still alive ?
hello purer,
long time no hear.......
this project is still alive ?
greetz
peng
hello purer,
long time no hear.......
this project is still alive ?
greetz
peng
Attachments
I am having a hard time reading the simplified Chinese, but if I read correctly:
full kit, fully assembled minus chassis and laser assembly RMB1200 (DALE resistors version); RMB 1090 (Chinese made resistors version)
http://www.tubebbs.com/add.php?forum=3&titid=613092&replyid=613092&style=0
http://www.tubebbs.com/add.php?forum=2&titid=324446&replyid=324661
what's the difference between this and purer's PCB?
full kit, fully assembled minus chassis and laser assembly RMB1200 (DALE resistors version); RMB 1090 (Chinese made resistors version)
http://www.tubebbs.com/add.php?forum=3&titid=613092&replyid=613092&style=0
http://www.tubebbs.com/add.php?forum=2&titid=324446&replyid=324661
what's the difference between this and purer's PCB?
i once had that pcb
80%is the same as puer's.but the "DIG OUT" is different.
it was basic on ZC99696/SAA7310/TDA8808/TDA8809/SAA7220.honinbou said:
80%is the same as puer's.but the "DIG OUT" is different.
actually I am more interested in the wgbda's version for it is a top loading version. It works perfectly with my CDM4/39, a top loading magnetic clamp version of the CDM4/19.
But for the same price (about US$200+import duties) I could get a Marantz/Philips CD80!
honinbou
But for the same price (about US$200+import duties) I could get a Marantz/Philips CD80!
honinbou
- Status
- Not open for further replies.