This amp is using CEP75n06's as the power supply fets with 100 ohm gate resistors and C945 and A733 as the drivers.
Is there a good sub for the 75n06's ?
Is there a good sub for the 75n06's ?
The original drivers are only rated for 100ma. They may hold up but I'd suggest something rated a bit higher. You need to have the BD139 and BD140 on hand anyway so order them.
Ill have to order some up..
I found 2 BD139's and put thoose in the amp..
Just for testing will the KTA1275's work to see if i have anymore problems?
I found 2 BD139's and put thoose in the amp..
Just for testing will the KTA1275's work to see if i have anymore problems?
- Status
- Not open for further replies.