MTX TE1501D

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
It's not possible to tell if the cores are identical to the original ones without testing. If they are the same, you can simply wind the cores the same as the originals. I don't know if they are the same as on the larger amps. The 92001 used 27 turns of parallel red and green. The attached photo shows how the windings are configured to go into the board.
 

Attachments

  • IMG_7004x.jpg
    IMG_7004x.jpg
    147.2 KB · Views: 60
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.