43mm, actually, maybe it's a custom order or something like that. Elfa is very weird with what they stock sometimes. And what one has to pay for it as well ...
Thus the worries for the heat. But I'm quite convinced I'll be fine, since nothing heated up too much on my early tests. I still have to see how it'll handle a long playing session though.
Thus the worries for the heat. But I'm quite convinced I'll be fine, since nothing heated up too much on my early tests. I still have to see how it'll handle a long playing session though.
Don't worry, during tests, mine after a long listening session measured from 37° to 42° Celsius with both modules attached to a single panel...so with a surface that equals your two panels. 😉
An externally hosted image should be here but it was not working when we last tested it.
Atilla said:
I wouldn't worry too much about it. The chips won't get very hot anyway and the toroids should remain just warm if not stone cold.
I'm overthinking it, I know 🙂
Right now i'm drilling and cutting already, mounting IEC sockets, toroids, and RCA sockets. Time to finish this assembly.
Right now i'm drilling and cutting already, mounting IEC sockets, toroids, and RCA sockets. Time to finish this assembly.
ClaveFremen said:
Hi Atilla,
I was wrong, it can be monted to the other side placing the bent in the interior of case, obviously you loose the function of that bent in the back...
😀
- Status
- Not open for further replies.