mounting 7" LCD into a 10" frame

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
I

iagranat

Member
Joined 2004
mounting 7" LCD into a 10" frame

hi all...
i'm new to this forum, but i have been reading these threads for quite some time.
i recently acquired an old Barco data projector 2100. it has a 10" (4:3) LCD inside that's has a "stain" like problem on it. i took it out and i want to replace it with a 7" lilliput.
the problem is that the old LCD has a 10" meatl & plastic frame (kind of resembles the frame that's around a regular LCD) that has 4 small built-in screws. i want to take the new 7" i bought and some how fit it inside the old frame so i won't have to create a whole new frame (which might not be as straight as the old one).

if anybody has any suggestions let me know.
thanks

ilan
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom