I found the problem all 3 opamps were defective ..
I think someone hit the power wire on the RCa shield ground ..
Since I had to replace the following
3 opamps
The 220 ohm resistor
1 diode that is for the regulator circuit
And had to fix the burnt traces on the board that connect to the rca shield grounds
I think someone hit the power wire on the RCa shield ground ..
Since I had to replace the following
3 opamps
The 220 ohm resistor
1 diode that is for the regulator circuit
And had to fix the burnt traces on the board that connect to the rca shield grounds
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.