Looking for recommendations for an AC or DC high torque/low RPM motor for my RCM. It will mount under the platter and drive the inside lip of the platter via a rubber idler wheel.
It must be fairly small and have an easy way to mount it to the 1/4" thick top plate that is made of hardboard.
Thanks in advance for the recommendations!
An externally hosted image should be here but it was not working when we last tested it.
It must be fairly small and have an easy way to mount it to the 1/4" thick top plate that is made of hardboard.
Thanks in advance for the recommendations!
A gearmotor from a surplus dealer, if you need more torque.
Or, a cordless drill... plenty of those at thrift stores. Power Wheels car motor, maybe.
Or, a cordless drill... plenty of those at thrift stores. Power Wheels car motor, maybe.
Here's what I ended up getting:
Wholesale Product Snapshot Product name is New Arrival 12V 100RPM High Powerful Torque Gear Box DC Gear Motor Micro parking lock TS-37B555
Now I'll need to figure out the power supply but that should be to difficult.
Wholesale Product Snapshot Product name is New Arrival 12V 100RPM High Powerful Torque Gear Box DC Gear Motor Micro parking lock TS-37B555
Now I'll need to figure out the power supply but that should be to difficult.
- Status
- Not open for further replies.