*Understand now
Understand what you mean . I was reference to drawing on 374 showing the inductance and resistance of the leads.The resistors were just there to signify the load of each channel's stage. How are ground connections handled between stages and channels? Are they tied together anywhere else besides the low side electrode of the cap?
Yes
4 leads (2x2) as I remember well. I used one in a psu for a tweaked 963sa dvd player
Wasn't there a t-cap or something from Jensen with more than the obvious amount of connections? I'm talking 2004 or about.
4 leads (2x2) as I remember well. I used one in a psu for a tweaked 963sa dvd player
More than 4 leads here
This picture shows 8 (eight) leads thus my confusion .They are pretty big, this box is about 8" long. I thought I had the wrong order when they first arrived!
I spoke with Campbell at SD and he said that Morgan found significant improvement with the added leads when using multiple stages. I havn't had the chance to use them or compare them yet but I look forward to.
Strange creatures....
Thanks Sy, but I have tried to contact them by email with no luck or feedback from them. I will try again.
Regards,
I will, many thanks for your kind help.
regards,
For anyone still interested in this thread, it appears that there is another manufacturer (ClarityCap) making Kelvin caps and they are available from the Parts Connexion in Canada. I don't know how they compare to those made by Suppression Devices, but it appears they are available in several sizes.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- Morgan Jones Kapacitors