Wima just reminds you that AC voltages are usually given as RMS numbers.Voltage rating - Voltage DC or Voltage AC?
It's interesting that Wima caps are rated with a DC and an AC voltage. Thus a 600V wima is typically 600Vdc but not AC, which is typically rated for less AC such as 400Vac --
Other manufacturers simply assume that you know that 400V rms sinusiodal waveforms have 1.4 x peaks which requires a 600V rating ...
If that is a reply to my other mashed post then you are SPOT on !!!benchbaron,
It is OK, no problem.
. . . I think most vacuum tube amplifiers are more reliable than computer software, etc.