Modelling a W-bin in HornResp

[Droco]

I would love to model this W-bin, but I'm not sure how to approach this the best.

Anyone who wants to help me out? Rough estimation is fine.

Thanks!

 

[pelanj]

If this is the classic variant with slot of the area of Sd, then first approximation would be an exponential horn with S1 = Sd, throat chamber volume is the woofer cone volume, S2 is the active front area - ca 90 x 60 cm. Length must be calculated or measured in CAD - see the red line in the picture.

 

[Droco]

If this is the classic variant with slot of the area of Sd, then first approximation would be an exponential horn with S1 = Sd, throat chamber volume is the woofer cone volume, S2 is the active front area - ca 90 x 60 cm. Length must be calculated or measured in CAD - see the red line in the picture.

Whoa, gee. Thanks! I'll model it and post the results here for those interested.