MJR-7 Mosfet Amplifier of M. Renardson

[Mooly]

Hi Alex,
If you can get a good Analogue 'scope on Ebay, personally I would go for that.
I know the DSO's look attractive but for seeing microscopic detail and not wondering whether what you are seeing is caused by the effects of the sampling go for analogue.
That's my personal opinion though. Try and get some other opinions perhaps on this Forum.

 

[tryalx]

Hi Karl,

I have posted a question about oscilloscopes here:

http://www.diyaudio.com/forums/showthread.php?s=&threadid=126259

Let's see if somebody answers.

Thanks, Alexandru

 

[Nordic]

Re: PSU power ratings

What power supply do I need?

http://www.tnt-audio.com/clinica/ssps3_e.html

have a look at the tables towards the bottom of the page...

 

[Mooly]

Hi Karl,

I have posted a question about oscilloscopes here:

http://www.diyaudio.com/forums/showthread.php?s=&threadid=126259

Let's see if somebody answers.

Thanks, Alexandru

Somebody has 🙂

 

[rherber1]

For those interested Mike Renardson's Audio Designs website is now found here;
Audio Amplifier Design

 

[Bruce@bluff]

I have built quite a few of these mosfet amps, really simple and easy to make. I doubled up on the fets and used a 90v supply with 10000uf 100v psu caps and 4700uf speaker coupling capacitors. I used 2sk1058 and 2sj162

 

[tiefbassuebertr]

For those interested Mike Renardson's Audio Designs website is now found here;
Audio Amplifier Design

include this website all parts of the old anglefire portal ? e. g.
audio amplifier