hey peeps, heres a screenshot of my HR data of my next additions to the setup.
designed to fill the response gap between 8x SS15 tapped horns, and some big 2inch compression horns for mids.
some opinions before i get making sawdust would be appreciated thanks
designed to fill the response gap between 8x SS15 tapped horns, and some big 2inch compression horns for mids.
some opinions before i get making sawdust would be appreciated thanks
An externally hosted image should be here but it was not working when we last tested it.
Ok so based on hornresp alone. S1 in this cabs case is 200. Reducing this impacted the output badly.
If I was to integrate a phase plug wouldn't I do it as an insert into a larger S1 to maintain the throat surface area?
I'm trying my absolute best to replicate the sim because this cab is very sensitive to changes.
If I was to integrate a phase plug wouldn't I do it as an insert into a larger S1 to maintain the throat surface area?
I'm trying my absolute best to replicate the sim because this cab is very sensitive to changes.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Live Sound
- PA Systems
- Midbass horn round 2