Hi all.
Does anyone have an circuit schema of this amp.
I'm going to build mesa clone.
If all'll go good i'll post photos and good schematics, maybe post an small article
Does anyone have an circuit schema of this amp.
I'm going to build mesa clone.
If all'll go good i'll post photos and good schematics, maybe post an small article
The last time I looked into this the only person posting Mesa Engr schematics on the web was someone in Holland. Mesa severely discourages posting schematics and reverse engineering their products. There are numerous rumours on the web about them designing their amps with that in mind. Sorry I don't have better news for you.
GL
GL
Yes that's the site I remember. Be careful with these schematics. I've heard stories that there are problems concerning the accuracy of them. Some of them are also difficult to read. That said, if it was me, I wouldn't be discouraged. I would give them a try.
GL
GL
Yeah, some of them are not accurate. The V-Twin schematic is way off with regards to component names/numbers, I had to do quite a bit of guesswork when modding mine.
thks a lot.. still searching all over the web.. it seems no chance to find schemas. Concerning to mesaboogie 400.. a lot of the same awful qlty schemas and not good amp. i've used it for 2 years. good, sometimes great but not more...
hello
Hi all i have a schematic here and i am to do some changes with it to replace the Bd318/317 to use 2sa1964/2sc5200
will that be a good idea
Here is the link
http://www.geocities.com/kobraelectronic/index/3/bipolar100w40ma.gif
Hi all i have a schematic here and i am to do some changes with it to replace the Bd318/317 to use 2sa1964/2sc5200
will that be a good idea
Here is the link
http://www.geocities.com/kobraelectronic/index/3/bipolar100w40ma.gif
hmmm I had the baron, which is roughly the same circuit, and it didn't sound fab, ok, fine amp, but a home built mullard 5-20 type bettered it for considerably less.
- Status
- Not open for further replies.