The B1 Korg voltage depends on how much distortion you can handle. According to Nelson's measurements the THD is about 7% at 5V output. Gain is about 3.5X so input is 1.4V.
The BA-3 preamp has gain of about 30X, and with a +/-24V power supply, the maximum output is about 14V. With a +/-32V power supply, the maximum output is about 19V.
The BA-3 preamp has gain of about 30X, and with a +/-24V power supply, the maximum output is about 14V. With a +/-32V power supply, the maximum output is about 19V.
Attachments
So, if I get this right. the BA3 output V would hit max with 0.46 volts of input.
What I'm trying figure out is the gain structure of my system.
What I'm trying figure out is the gain structure of my system.
🙂 👍Yes, if your BA-3 has a +/-24V power supply.
By the way all of the voltages are RMS.