Hello,
I just received a Marantz DV7600 the other day (That I purchased on eBay.. ok go ahead and laugh.. lol) and upon unpacking her and plugging her in.. Nothing, no power. So I tried four other power cords and still nothing. So I contacted the seller and they swore that the unit was working.. Which, She's so pristine that it's just killing me. So I had started the process of wanting to return her because I just figured the thing is just DEAD! But I had an idea to pop off the cover and check for a bad fuse... Sure enough there is a bad fuse on the power board. On the board it says "250v T2AL", which I got the fuse popped out and it says the same thing.. though in reverse.. I can figure that it's 250 volts.. but I'm not sure about the T2AL part?? And I don't know whether I need a fast burning fuse, or slow, etc? Do I need an "Official" Marantz part fuse for this, or will getting one from somewhere else effect the player negatively. Obviously I want to see if this is just a simple fuse problem, or if there's something more mighty going on. Also.. I paid just over a Buck for the unit.. is this good, and if there's a problem beyond a fuse problem (if it's blows them right away.. is it worth it to get it looked at and fixed)?
Thank you to anyone looking at my post and helping me with commentary. I really appreciate it! Take care out there!
I just received a Marantz DV7600 the other day (That I purchased on eBay.. ok go ahead and laugh.. lol) and upon unpacking her and plugging her in.. Nothing, no power. So I tried four other power cords and still nothing. So I contacted the seller and they swore that the unit was working.. Which, She's so pristine that it's just killing me. So I had started the process of wanting to return her because I just figured the thing is just DEAD! But I had an idea to pop off the cover and check for a bad fuse... Sure enough there is a bad fuse on the power board. On the board it says "250v T2AL", which I got the fuse popped out and it says the same thing.. though in reverse.. I can figure that it's 250 volts.. but I'm not sure about the T2AL part?? And I don't know whether I need a fast burning fuse, or slow, etc? Do I need an "Official" Marantz part fuse for this, or will getting one from somewhere else effect the player negatively. Obviously I want to see if this is just a simple fuse problem, or if there's something more mighty going on. Also.. I paid just over a Buck for the unit.. is this good, and if there's a problem beyond a fuse problem (if it's blows them right away.. is it worth it to get it looked at and fixed)?
Thank you to anyone looking at my post and helping me with commentary. I really appreciate it! Take care out there!
Replace with the same type and value as the one you removed. 2Amp Time Lag or Slow Blow. They are all rated at 250volts or higher.
electrosmart Pack of 10 2A T2A T2AL 20mm x 5mm Glass Fuse 250v Slow Blow/Time Lag/Delay: Amazon.co.uk: DIY & Tools
electrosmart Pack of 10 2A T2A T2AL 20mm x 5mm Glass Fuse 250v Slow Blow/Time Lag/Delay: Amazon.co.uk: DIY & Tools