Marantz CD74 laser trimpots

Status
Not open for further replies.
Does anyone know how to adjust any of the laser trimpots on the CDM1 board for a Marantz CD74? I have read a <a href="http://www.diyaudio.com/forums/showthread.php?s=&threadid=67510" target="blank">related thread by drews</a> but there are several problems. For starters, Q239 appears to be a reference to the Marantz service manual. I have inspected the CDM1 board and found several transistors, but none of them is marked on the PCB as Q239. Also drews does not say which parts of the circuit he used to make his measurements of 300mV and 650mV (the ones which were too high.) Also, does anyone have the service manual for the CD74?
 
[Am reposting my first post, because the hyperlink in the first post did not work.] Does anyone know how to adjust any of the laser trimpots on the CDM1 board for a Marantz CD74? I have read the following related thread by drews:

http://www.diyaudio.com/forums/showthread.php?s=&threadid=67510

However there are several problems with drews' advice. For starters, Q239 appears to be a reference to the Marantz service manual. I have inspected the CDM1 board and found several transistors, but none of them is marked on the PCB as Q239. Also drews does not say which parts of the circuit he used to make his measurements of 300mV and 650mV (the ones which were too high.) Also, does anyone have the service manual for the CD74?
 
I have a (heavily modded) CD-74 and a service manual. The CDM-1 service instructions are not included, but I have a manual for that, too (unfortunately it is in Dutch). Please contact me via email.

lcsaszar at freemail dot hu
 
Marznt CD74 service manual

Thanks oshifis! I got the service manual for the Marantz CD74, as well as the .pdf files for the TDA1540/SAA7000/SAA7010/SAA7020/SAA7030 ICs. If anyone needs them I can be contacted by email using the hyperlink from my user profile.
 
Status
Not open for further replies.