Despite a laser diode in good condition there are sometimes (not always) drop-outs and skipping to observe.
Surprisingly there is no response to vibration (no sensitive against beating on top or on site from the enclosure while playback.
RF-signal looks also very good.
All electrolytic caps are replaced on the servo board.
How can I check the motor of the CDM4/19 ?
Thank you for advices
Surprisingly there is no response to vibration (no sensitive against beating on top or on site from the enclosure while playback.
RF-signal looks also very good.
All electrolytic caps are replaced on the servo board.
How can I check the motor of the CDM4/19 ?
Thank you for advices