I realize it's not the player of choice but it's what i had when the madness set in and now it's too late but go forward. I would say it's gone about 2 thirds of what's possible (reasonable), but Brent would know this better. It sounds very good however. It has Ray's DOS board so you know I'm serious!
Last edited:
So where can i obtain rubycon ZA/ZLG from plz gents
cheers alan
ps What value to use in the opamp decouple
cheers alan
ps What value to use in the opamp decouple
So where can i obtain rubycon ZA/ZLG from plz gents
cheers alan
ps What value to use in the opamp decouple
I'd use either 220uF or 470uF. You can get ZA's from Lee (Thomo) and ZLG's from Farnell (min order value). If you want to go all posh, click the smiley!!! 😀
Found some nichon fg audio grade 330uf 25v they be ok for decoupling ,blackgates bit expensive 😱I'd use either 220uF or 470uF. You can get ZA's from Lee (Thomo) and ZLG's from Farnell (min order value). If you want to go all posh, click the smiley!!! 😀
many thanks alan
Those BG's are in $ dont forget! They aren't bad at $3.75 for 470uF/16v! They are good on delivery too.
try these but I think the minimum order quantity is £25 I think
RUBYCON|16ZLG470M10X12.5|CAPACITOR, 470UF, 16V | Farnell United Kingdom
I think Lee is about £2.50 for ZA's which were always more expensive than ZLG's
Be carefull of the eBay "too good to be true" prices!
If you buy from any of the above, you know what you are getting
try these but I think the minimum order quantity is £25 I think
RUBYCON|16ZLG470M10X12.5|CAPACITOR, 470UF, 16V | Farnell United Kingdom
I think Lee is about £2.50 for ZA's which were always more expensive than ZLG's
Be carefull of the eBay "too good to be true" prices!
If you buy from any of the above, you know what you are getting
Gonna need 4 tenner aint bad dont mind that is 16v too low tho rays list says 25v the nichion caps came from germany 10 for 9.30 plus postage
thanks alan
thanks alan
Gonna need 4 tenner aint bad dont mind that is 16v too low tho rays list says 25v the nichion caps came from germany 10 for 9.30 plus postage
thanks alan
Too low for what? 16v caps are too low for a 12v rail??????😕
ZA's are used in many commercial upgrades and they are not the cheapest, that must tell you something. ZLG are the replacement for ZA as they are now obsolete. They are much cheaper than the ZA's were but they are still much better then most. Caps are a personal choice but I've been pulling nichicon elco's out as part of my upgrades!!!!
You'll loose loads of the details that ZA's will give you using Nichicon. If you like a warmer sound you could use Nichicon or you could start with a TDA1541a based player like myself, Simon and Lee did!!!
Last edited:
All ready got a cd52se with bb2604s thats nice and warm sorry i misunderstood thought bigger was better😡 il try some za s thenToo low for what? 16v caps are too low for a 12v rail??????😕
ZA's are used in many commercial upgrades and they are not the cheapest, that must tell you something. ZLG are the replacement for ZA as they are now obsolete. They are much cheaper than the ZA's were but they are still much better then most. Caps are a personal choice but I've been pulling nichicon elco's out as part of my upgrades!!!!
You'll loose loads of the details that ZA's will give you using Nichicon. If you like a warmer sound you could use Nichicon or you could start with a TDA1541a based player like myself, Simon and Lee did!!!
sorry to be a pain alan
ps got terry s ad
few beers late last night😀 sorry how do i get in touch with leeUpdate lee sorry for the ad
thanks alan
so its 470uf 16v rubycon za s
470uf 16v so just won a ki of ebay 63 quid this was ment for a se lol
thanks for your help alan
thanks for your help alan
love my cd52 with bbs it sounds so sweet pm84 amp ms 55tis brothers in arms musical bliss
cheers guys
cheers guys
- Home
- Source & Line
- Digital Source
- Marantz CD63 & CD67 mods list