Hi,
I have this tuner which I have owned since new. MD did the Etude upgrade and there are two Solen 250V 13uf caps that I’m looking to replace/upgrade. ( they are a part of the etude upgrade)
Google Image Result for http://usr.audioasylum.com/images/y2012/04/60939/Etude_inside.JPG
They are the two at the rear left side.
I can’t find any caps w those specs. What would be a safe rating for a replacement?
Thanks!
Per
I have this tuner which I have owned since new. MD did the Etude upgrade and there are two Solen 250V 13uf caps that I’m looking to replace/upgrade. ( they are a part of the etude upgrade)
Google Image Result for http://usr.audioasylum.com/images/y2012/04/60939/Etude_inside.JPG
They are the two at the rear left side.
I can’t find any caps w those specs. What would be a safe rating for a replacement?
Thanks!
Per
Any of these...
Metalized Polypropylene Crossover Capacitors in the Speaker Components Department at Parts Express | 294
Even 12uF would do. Do not warry about voltage rating, its an ouput cap which will not see more than dozen volts.
Metalized Polypropylene Crossover Capacitors in the Speaker Components Department at Parts Express | 294
Even 12uF would do. Do not warry about voltage rating, its an ouput cap which will not see more than dozen volts.
It's not that critical. It only affects lower fr rollof. If you choose bigger cap, it rolls of lower, but then its fm, it may not even has such low frequencies.
Btw, you can parallel caps to get precise.
Btw, you can parallel caps to get precise.
- Status
- Not open for further replies.