Made another magnetic ribbon. 150cm long 5 cm wide, 6.5 ohm.
Measurement distance 1 meter.
Magnets N-S-N
Measurement distance 1 meter.
Magnets N-S-N
Attachments
Last edited:
Ihave never seen a ribbon design like this before.A sort of planar/ribbon,but no suspension?Are you willing to share more informations?
Good luck.
Bernt.
Good luck.
Bernt.
There is felt in on the sides and the yarn in the Middle of the magnets.
the ribbon is ligth magnetic from nano iron in the glue. I have a link to
the nano iron in the 0.6my ribbon tread. By the way the magnetic ribbon
was invented by Johnny Sorensen a danish reviewer some 25 years ago.
the ribbon is ligth magnetic from nano iron in the glue. I have a link to
the nano iron in the 0.6my ribbon tread. By the way the magnetic ribbon
was invented by Johnny Sorensen a danish reviewer some 25 years ago.
Attachments
By the way the magnetic ribbon
was invented by Johnny Sorensen a danish reviewer some 25 years ago.
using studio recording 'tape' 😀
but a bit heavy, and not sure it worked that well at all
actually, I dont see the point of a magnetic diaphragm
on the contrary 😕
thumbs up for your magnet system

I see it now.Active membrame is app.30mm.I thought it was app 50mm.
Still i think it´s a new way of suspension. The one from Jonny vas fixed at the ends as usual or what?
Yours must be a plannar ?
Keep up your work.
Bernt.
Still i think it´s a new way of suspension. The one from Jonny vas fixed at the ends as usual or what?
Yours must be a plannar ?
Keep up your work.
Bernt.
using studio recording 'tape' 😀
but a bit heavy, and not sure it worked that well at all
actually, I dont see the point of a magnetic diaphragm
on the contrary 😕
thumbs up for your magnet system)
Well it sounds better with nano iron. More relaxst then with out.
maby because it is much ligther then the recording tape.
I see it now.Active membrame is app.30mm.I thought it was app 50mm.
Still i think it´s a new way of suspension. The one from Jonny vas fixed at the ends as usual or what?
Yours must be a plannar ?
Keep up your work.
Bernt.
it dont need to be magnetic the make the suspension just bend the magneticsystem.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Planars & Exotics
- Magnetic paper ribbon