LuDEF kit packages

[Zen Mod]

use info from this line: For anything else , write either here , send PM or directly to >zenmodiyaudio@gmail.com<




somehow, Trade threads are easier to not see ....... so better through direct e-mail correspondence, even if that means that you must endure my usual and occasionally longer lags

 

[nautibuoy]

Thanks ZM.

 

[peppennino]

Oh Mighty Choky
For NTC board @230V is it necessary (like in Papa's schematic) to have 2X115V primaries or can I go for single 230V?
So long and thanks for all the PCBs

 

[Zen Mod]

you , living in a Cradle of all Civilization, and all Decadence of same, you're good with simple 230Vac primary

which means - one NTC small pcb is covering two Donuts, if they;re in same case

 

[peppennino]

Mostly decadence than civilization...
Yes, same case, two donuts.

Thanks, oh mighty Zen, I'll put a Disater Area album in your honour, waiting for some black starship diving into the Sun 😀

 

[chromenuts]

Package received today...thanks for your hard work ZM!

 

[peppennino]

Nothing here... 🙁 Poste Italiane is a disaster!

 

[Skip Pack]

Picked up package at Post Office today. All looks good!

 

[tombo56]

While filling the cart at Mouser, I've noticed that 120 Ω resistors are missing from the package/order list (post #15) and Zener diodes should be 5.6 V instead of 6.6 V.

 

[twitchie]

Happy to report my delivery of Serbian newspaper is safely with me now 🙂

Cheers!
Stephen

 

[banderson546]

Oh Mighty Zenmod!
I'm close to getting the LuDEF ready to power on and do trimpot adjustments.
Is there any recommended initial setting for the trimpots?

Thanks
Bruce

 

[banderson546]

Low Output

Mighty Zenmod -
I powered up slowly with a variac and successfully got the trimpots
adjusted without any drama. All settings adjusted as expected.

But with speakers connected the audio output is extremely low on both channels.
I'm using an EDCOR PC600/600.

Any ideas?

Thanks
Bruce