Yep those datasheets are there for a reason. Post #2 was also quite clear. Heck, it is even the thread title "LT4320 CLoad Selection" by yourself
Ha ha you also quoted the datasheet wisdom in the first post "A 1μF ceramic and a 10μF minimum electrolytic capacitor must be placed across the OUTP and OUTN pins with the 1μF ceramic placed as close to the LT4320 as possible".
I hope the MOSFETS survived the crash?
Ha ha you also quoted the datasheet wisdom in the first post "A 1μF ceramic and a 10μF minimum electrolytic capacitor must be placed across the OUTP and OUTN pins with the 1μF ceramic placed as close to the LT4320 as possible".
I hope the MOSFETS survived the crash?
Last edited: