Hello
i want to build loudspeakers based on full range Monacor sp-200x.
can you tell me what is the result if the volume of my loudspeakers is greater than the computed one (with formulas) - the gap is about 15l (60l instead of 45l)
thank you for your answer
i want to build loudspeakers based on full range Monacor sp-200x.
can you tell me what is the result if the volume of my loudspeakers is greater than the computed one (with formulas) - the gap is about 15l (60l instead of 45l)
thank you for your answer
Greets!
Assuming this is a sealed design, the difference probably will not be audible. You can always stick a brick, scrap wood, or similar in one to see if you can hear any difference between it and the larger one. If vented, it will actually perform slightly better.
GM
Assuming this is a sealed design, the difference probably will not be audible. You can always stick a brick, scrap wood, or similar in one to see if you can hear any difference between it and the larger one. If vented, it will actually perform slightly better.
GM
- Status
- Not open for further replies.