Looking for a replacement Output Pot for a RT-909 - RCV-076

[DrunkenBeard]

Hoping someone here could help me source a replacement Pot for an RT-909.

I maybe forced to try and repair the current one but its pretty badly damaged.

Part Number - RCV-076

Thanks!

 

[MAAC0]

This is what comes up in Google

CONTROL(OUTPUT LEVEL) - RCV-076

parts_pioneerrt909

 

[wiseoldtech]

Hoping someone here could help me source a replacement Pot for an RT-909.

I maybe forced to try and repair the current one but its pretty badly damaged.

Part Number - RCV-076

Thanks!

Likely linear..... what's the value, shaft, etc.


Edit: that's a 20K tapped pot...... rare as hell.....
Good luck finding one these days.

 

[DrunkenBeard]

This is what comes up in Google

CONTROL(OUTPUT LEVEL) - RCV-076

parts_pioneerrt909

Unfortunately I have already attempted to buy that part from them and they refunded me saying they were out of stock 😡

Likely linear..... what's the value, shaft, etc.

Its 20k with the addition of a Left and Right going + or - 10k center being balance for the left and right channel.

Picture of the part - http://www.reelprosoundguys.com/images/909IO1_1.jpg

6 poll with two at the top. Right now I'm attempting a repair of the center shaft just waiting for some donor parts.

Worse case I picked up an additional pot for the Line it has the same resistance but lacks the left and right channel balance. I can make do but I would really like to make it all work if possible.