tmblack said:I have a Rega 2 and Thorens TD160 with the original arms.
Which Linn Basik are you using with the Rega?
The RB200 is a heavy S arm that I rather replace and the TD16 has some broken wiring and hums.
Linn Basik Plus. The R200 arm is not bad. Mine came with a cheap Jelco .
dave
Hi,
The original Linn Basik was the LVV, an S-shaped detachable headshell arm with a chrome-plated arm tube and standard "SME-fitting" headshell collet. The bearing assembly resembled the ADC ALT-1.
The LVX had a different (more robust) bearing assembly, still with a detachable headshell, but the black anodized arm tube was straight and the diecast headshell was secured with a hex head bolt.
I have owned both, and the LVX was much better, though I don't think either arm would be very happy with the more demanding types of cartridge.
The Basik Plus was a fixed-headshell development of the LVX. It also had better bearings. I think the first version of the current Akito might have been a further development of this arm.
HTH,
Mark
The original Linn Basik was the LVV, an S-shaped detachable headshell arm with a chrome-plated arm tube and standard "SME-fitting" headshell collet. The bearing assembly resembled the ADC ALT-1.
The LVX had a different (more robust) bearing assembly, still with a detachable headshell, but the black anodized arm tube was straight and the diecast headshell was secured with a hex head bolt.
I have owned both, and the LVX was much better, though I don't think either arm would be very happy with the more demanding types of cartridge.
The Basik Plus was a fixed-headshell development of the LVX. It also had better bearings. I think the first version of the current Akito might have been a further development of this arm.
HTH,
Mark
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.