I purchased a beautiful Digital Equipment "Power Supply Noise Amplifier" -- talk about legacy devices -- there is a Burr-Brown OPA600CM and a National LH4004CD -- I know that the latter will drive a 50 ohm load for a spec analyzer and I believe that the BB unit is an early dif or instrumentation amp. Anyone have a clue about these devices?
Maybe this helps:
http://www.ortodoxism.ro/datasheets/BurrBrown/mXsrrrt.pdf
found from here:
http://www.datasheetcatalog.com/datasheets_pdf/O/P/A/6/OPA600.shtml:smash:
http://www.ortodoxism.ro/datasheets/BurrBrown/mXsrrrt.pdf
found from here:
http://www.datasheetcatalog.com/datasheets_pdf/O/P/A/6/OPA600.shtml:smash:
Thanks, I had googled the part and came up with nothing.
Here's the amplifier:
Here's the amplifier:
An externally hosted image should be here but it was not working when we last tested it.
- Status
- Not open for further replies.