Labornetzgerät Netzgerät Labornetzteil DC Netzteil Trafo regelbar 5A 30V 4 LED#S | eBay
Is it possible to get + - 30v from this?
It has double outputs but can one be used as a negative out?
Is it possible to get + - 30v from this?
It has double outputs but can one be used as a negative out?

Is it possible to get + - 30v from this? It has double outputs but can one be used as a negative out?
Yes, there is a switch to series connect the two floating 30V supplies, and you use the middle red and black terminals as commons.
Then the leftmost black=-30V, the rightmost red=+30V, and the middle red/black=common. The greens are chassis grounds.
You can also parallel the two 30V supplies for twice the current. There's also a separate 5V supply.
We've purchased a number of these models, and they seem ok for the price.
Last edited:
Yes, there is a switch to series connect the two floating supplies, and so you would use the middle red and black terminals as commons.
Then the leftmost black=-30V, the rightmost red=+30V, and the middle red/black=common. The greens are chassis grounds.
Check the manual. There's also a separate 5V supply. We've purchased a number of these models, and they seem ok for the price.
Ok,thanks.
I am sorry, I don't understand the language.
Try this- looks like the same PS...
Dr Meter HY3005F 3 Variable Triple Output Linear DC Regulated Power Supply 30V5A | eBay
hi Ryssen,
if you buy at this seller he will charge € 18,80 p&p to sweden. no problem thuogh. customs is yuors, but with a bill with extra vat of 19% easy procedure.
ingo
if you buy at this seller he will charge € 18,80 p&p to sweden. no problem thuogh. customs is yuors, but with a bill with extra vat of 19% easy procedure.
ingo
I see they are selling this one in Sweden to but the shipping is about the same so...they might still send it from abroad.
Nätaggregat 0-30V Triple Output 5A LCD-skärm 300W på Tradera.com -
Nätaggregat 0-30V Triple Output 5A LCD-skärm 300W på Tradera.com -
Keep an eye on these PSUs, this model is known for having a turn-on spike. It was fixed in a later revision by the OEM but not before at least 90% off the supplies had already entered various channels in the market.
All you can do is disconnect your circuit when you power the service on, if I remember correctly.What to do about it?
- Status
- Not open for further replies.
- Home
- Design & Build
- Equipment & Tools
- Labornetzgerat