Hi
just bought a Kogi 14"
does anybody has a picture of what I have to solder on this panel.
Paid 149.99 after rebate
could not find any pictures on the forum
thanks
just bought a Kogi 14"
does anybody has a picture of what I have to solder on this panel.
Paid 149.99 after rebate
could not find any pictures on the forum
thanks
best Buy has that panel, Looked good untill I searched for the specs........ as follows
Compatibility: PC
Panel type: TFT active matrix
Display size: 14.1 inches
Diagonal viewable screen size: 14.1 inches
Dot pitch: 0.297 mm
Contrast ratio: 250:1
Glass surface: Reduced glare
Horizontal viewing angle: 60 degrees left and right (120 degrees total)
Vertical viewing angle: 70 degrees up, 30 degrees down
Light source: Florescent
Response time: 50 ms
Brightness: 200 cd/m2
Input signals: RGB analog
Input connector/cable: 15-pin D-sub
Maximum noninterlaced resolution: 1024 x 768 dpi
Width: 17 inches (container)
Height: 18 inches (container)
Depth: 8.5 inches (container)
Shipping weight: 12.0 pounds
Warranty, parts: Information not available
Warranty, labor: Information not available
RESPONCE TIME 50 MS....................thats slowwwwww pas this one up, the 14 inch norcent would be a better choice and only 20 bucks more at wallmart.com
Compatibility: PC
Panel type: TFT active matrix
Display size: 14.1 inches
Diagonal viewable screen size: 14.1 inches
Dot pitch: 0.297 mm
Contrast ratio: 250:1
Glass surface: Reduced glare
Horizontal viewing angle: 60 degrees left and right (120 degrees total)
Vertical viewing angle: 70 degrees up, 30 degrees down
Light source: Florescent
Response time: 50 ms
Brightness: 200 cd/m2
Input signals: RGB analog
Input connector/cable: 15-pin D-sub
Maximum noninterlaced resolution: 1024 x 768 dpi
Width: 17 inches (container)
Height: 18 inches (container)
Depth: 8.5 inches (container)
Shipping weight: 12.0 pounds
Warranty, parts: Information not available
Warranty, labor: Information not available
RESPONCE TIME 50 MS....................thats slowwwwww pas this one up, the 14 inch norcent would be a better choice and only 20 bucks more at wallmart.com
wow i just hooked up this kogi 14.1 lcd monitor and i couldnt even recomend this thing for some one to use as a monitor let alone a projector $149 is $149 too much to pay for this peice of crap my buddy will be taking this thing back asap.
yeah thats what i said
im not sure but isint "kogi" indian for "peice of crap" ? i sure think it is
im not sure but isint "kogi" indian for "peice of crap" ? i sure think it is

thanks for the pictures
there are two models
one is the NA that is 50ms
the orther is the DA and is 30ms
there are two models
one is the NA that is 50ms
the orther is the DA and is 30ms
How about this LCD monitor:
http://www.tigerdirect.com/applicat...E&SKU=t299-1000&sourceid=00294077376196433767
I posted it in another thread too.
http://www.tigerdirect.com/applicat...E&SKU=t299-1000&sourceid=00294077376196433767
I posted it in another thread too.
pete777 said:thanks for the pictures
there are two models
one is the NA that is 50ms
the orther is the DA and is 30ms
put 2+2 and you get NADA 🙂 😀 lol
Negative your selling your sharp qa 1200, Im sad I thought your were the rebel of the group with your panel, what are you moving up to? lcd monitor I would assume But what one?
LMAO rebel? lol is that a compliment 😉 🙂
I plan to sell my panel, yes, but i havent recieved any offers and i DOUBT anyone here will be dumb enough to buy it for 300$ so i will try ebay lol but im in absolutely no hurry to sell it, im having more fun than ever with it now that the C. lens is installed 🙂
i will run some more tests on my projector and if i am content with the results....then i will keep it...and test the HQI on it....and test a triplet lens on it if all else fails then im gonna sell
I plan to get a super high CR:1 LCD monitor! 450:1 hopefully if im goin to use a 15 in an lose an inch of screen i might as well get my money's worth.
I have my eyes on the nec 1560 and the vewsonic AE series.
I plan to sell my panel, yes, but i havent recieved any offers and i DOUBT anyone here will be dumb enough to buy it for 300$ so i will try ebay lol but im in absolutely no hurry to sell it, im having more fun than ever with it now that the C. lens is installed 🙂
i will run some more tests on my projector and if i am content with the results....then i will keep it...and test the HQI on it....and test a triplet lens on it if all else fails then im gonna sell

I plan to get a super high CR:1 LCD monitor! 450:1 hopefully if im goin to use a 15 in an lose an inch of screen i might as well get my money's worth.
I have my eyes on the nec 1560 and the vewsonic AE series.
- Status
- Not open for further replies.