Hi guys,
I need a schematic or service manual for this amplifier. Very hard to find and no help from Klotz company either since they don't manufacture these amps anymore. Basic topology, uses 5 pairs Sanken 2SA1295/ 2SC3264 output transistors which are driven by a pair of Sanken 2SA1294 /2SC3263. On the input there is a bimos operational amplifier CA3140E. Output stage is fed with +/-95VDC. Amplifier gives approx. 650W on 4 Ohms load. Any help would appreciate.
Regards. 🙂
I need a schematic or service manual for this amplifier. Very hard to find and no help from Klotz company either since they don't manufacture these amps anymore. Basic topology, uses 5 pairs Sanken 2SA1295/ 2SC3264 output transistors which are driven by a pair of Sanken 2SA1294 /2SC3263. On the input there is a bimos operational amplifier CA3140E. Output stage is fed with +/-95VDC. Amplifier gives approx. 650W on 4 Ohms load. Any help would appreciate.
Regards. 🙂
An externally hosted image should be here but it was not working when we last tested it.
Try AEQ International - Home since KLOTZ amps are made in Spain by AEQ...
ALSO SOLD with brand AEQ model 1201.
Just my two cents.
Boris
ALSO SOLD with brand AEQ model 1201.
Just my two cents.
Boris
This is schematic Klotz PA900 , Klotz PA1200 :
klotz_pa910_2x450w_power_amplifier (1).pdf - DocDroid
klotz_pa910_2x450w_power_amplifier (1).pdf - DocDroid
- Status
- Not open for further replies.